The root cause of the failure of the main motor of the single screw extruder and what is the correct treatment method
2024-09
What is the reason why the main motor of the single screw extruder cannot be started and its treatment method?
The following small series respectively expounds the reasons why the host cannot be started and its treatment methods, as follows.
1. Causes:
(1) The driving procedure is wrong.
(2) There is a problem with the thread of the main motor, whether the fuse is burned.
(3) The interlocking device related to the main motor is activated
2. Treatment method:
(1) Check the procedure and restart the vehicle in the correct driving sequence.
(2) Check the main motor circuit.
(3) Check whether the lubricating oil pump is started, and check the status of the interlocking device related to the main motor. The oil pump does not turn on and the motor cannot be turned on.
(4) If the inverter induction is not finished, turn off the total power supply and wait for 5 minutes before starting.
(5) Check whether the emergency button is reset.
Previous Page:
Next page:
RELATED INFORMATION
How PET Sheet Extruders Revolutionize Plastic Processing Machinery
How PET Sheet Extruders Revolutionize Plastic Processing Machinery Table of Contents Introduction to PET Sheet Extruders Understanding Plastic Processing Machinery The Technology Behind PET Sheet Extruders Advantages of Using PET Sheet Extruders Sustainability in Plastic Manufacturing Applications of PET Sheets in Various Industries Future Trends in PET Sheet Extrusion
PET sheet extruder machines play a crucial role in the field of plastic processing, specifically in the production of polyethylene terephthalate (PET) sheets. These machines are designed to melt and extrude PET resin into sheets of varying thickness, which are then used in a variety of applications such as packaging, construction, and consumer goods. Understanding how these machines work and their
Website
Copyright©Jieyang Deke Machinery Co., Ltd.